Platinum M51
The Platinum M51 Bandsaw is manufactured from HSS M51 (10% cobalt) edge material electrobeam welded to specially disigned BIPICO spring stell backing material. Platinum M51 blade has exellent wear and red hot resistance due to higher percentage of tungsten and cobalt. It has proper distrubution of dense hard carbide elements to give superior cutting performence.
Platinum M51- Premium
| Specially disigned tooth geometry with positive rake angle having additional relif angle and deep gullet. |
 |
| SIZE | TEETH FORM | ||||
| mm | inches | CONSTANT | VARIABLE | ||
| STANDARD TPI | HOOK TPI | STANDARD TPI | HOOK TPI | ||
| 27 X 0,90 | 1 1/16 X 0,035 | - | - | - | 2/3, 3/4, 4/6 |
| 34 X 1,1 | 1 1/3 X0,042 | - | - | - | 2/3, 3/4, 4/6 |
| 41 X 1,3 | 1 5/8 X0,050 | - | - | - | 2/3, 3/4 |
| 54 X 1,6 | 2 5/8 X 0,063 | - | - | - | 2/3 |
CUTTING APPLICATION: Deep drawing steel, Machining steel, Quenched and Tempered steel, Case hardened steel, Spring steel, Iloy steel, Hot work steel, Cold work steel, Cast iron steel and heat resistand steel. It can be used for Hardened material up to 45 HRC.
Platinum M51- Ultima
| Specially disigned tooth geometry with positive rake angle having additional relif angle and deep gullet for aggressive cutting. |
 |
SIZE
TEETH FORM
mm
inches
CONSTANT
VARIABLE
STANDARD TPI
HOOK TPI
STANDARD TPI
HOOK TPI
34 X 1,1
1 1/3 X0,042
-
-
-
2/3
41 X 1,3
1 5/8 X0,050
-
-
-
2/3
54 X 1,6
2 5/8 X 0,063
-
-
-
2/3
CUTTING APPLICATION: Quenched and Tempered steel, Case hardened steel, High alloy steel, Nitriding steel, Stainless steel, Iloy steel, Hot work steel, Cast iron steel and heat resistand steel. It can be used for Hardened material up to 45 HRC.
