POWER HACKSAW BLADES
Bimetal hacksaw and all hard hss acksaw
 
VARI - TOOTH
 
 
THE NEW 20/24 VARI TOOTH Hacksaw Blade
HAVE TWO BLADES IN ONE!
 
BENEFITS
20 % Longer life, Faster Cutting
Reduces inventory of different TPI Blade
No Lost time for changing different TPI Blade
Less Cost per cut
Used in a variety of applications
 
BIMETAL HIGH SPEED STEEL
A virtually unbreakable bimetal blade for superb cutting performance, wear resistance and safety. The combination of an M2 High Speed ground cutting edge electron-beam welded to a flexible alloy back gives a level of cutting power and flexibility that is far superior to edge hardened or conventional flexible blades. Cuts through all types of materials including alloys and stainless steels.
 
SIZE IN M.M.
(L x W x T)		 SIZE IN INCHES
(L x W x T)		 TEETH
PER INCH		 UNIT OF
PACK
250 x 12.5 x 0.63 10 x 1/2 x 0.025 14,18, 24, 32 100
300 x 12.5 x 0.63 12 x 1/2 x 0.025 14,18, 24, 32 100
 
ALL HARD HIGH SPEED STEEL
These blades are ideal to use when the work is held securely and the blade is not subjected to bending and twisting stresses. They hold the edge when cutting hard-to-machine alloys, maintaining straightness of the cut. The blades are uniformly hardened throughout.
 
SIZE IN M.M.
(L x W x T)		 SIZE IN INCHES
(L x W x T)		 TEETH
PER INCH		 UNIT OF
PACK
250 x 12.5 x 0.63
 		 10 x 1/2 x 0.025
 		 14,18, 24, 32
 		 100
300 x 12.5 x 0.63
 		 12 x 1/2 x 0.025
 		 14,18, 24, 32
 		 100
300 x 16 x 0.80
 		 12 x 5/8 x 0.032 14,18, 24 100
 
FLEXIBLE HIGH SPEED STEEL
These blades have hardened, high speed steel teeth with a tough, shock-absorbing back. They are shatter-resistant and excellent for interrupted cuts and sawing in cramped places where the blade is subject to bending and twisting stresses.
 
SIZE IN M.M.
(L x W x T)		 SIZE IN INCHES
(L x W x T)		 TEETH
PER INCH		 UNIT OF
PACK
250 x 12.5 x 0.63
 		 10 x 1/2 x 0.025
 		 14,18, 24, 32
 		 100
300 x 12.5 x 0.63
 		 12 x 1/2 x 0.025
 		 14,18, 24, 32
 		 100
300 x 16 x 0.80
 		 12 x 5/8 x 0.032 14,18, 24 100
 
LOW ALLOY STEEL ALL HARD HAND HACKSAW BLADES & JUNIOR SAW BLADES
These carbon steel, all-purpose blades are for cutting mild steel, copper, brass, aluminum and similar materials.
 
SIZE IN M.M.
(L x W x T)		 SIZE IN INCHES
(L x W x T)		 TEETH
PER INCH		 UNIT OF
PACK
150 x 6 x 0.4 junior saw 6 x 1/4 x 0.017 32 100
250 x 12.5 x 0.63 10 x 1/2 x 0.025 14,18, 24, 32 100
300 x 12.5 x 0.63 12 x 1/2 x 0.025 14,18, 24, 32 100
Bimetal Full - Flexible All Hard
 
POWER HACKSAW BLADES
ALL HARD HIGH SPEED STEEL
High Speed Power hacksaw blades of high speed steel satisfy the highest requirements for power sawing bars, tubes, sections, etc. High Speed blades are specially hardened and precision set. Blades suitable for Kasto Machine can also be produced.
 
SIZE IN M.M.
(L x W x T)		 SIZE IN INCHES
(L x W x T)		 TEETH
PER INCH		 UNIT OF PACK
300 x 25 x 1.25 12 x 1 x 0.050 10,14 20
350 x 25 x 1.25 14 x 1 x 0.050 10,14 "
400 x 25 x 1.25
 		 16 x 1 x 0.050 10,14 10
425 x 25 x 1.25 17 x 1 x 0.050 10,14 "
450 x 25 x 1.25 18 x 1 x 0.050 10,14 "
350 x 32 x 1.60 14 x 1.1/4 x 0.062 6,10 "
400 x 32 x 1.60
 		 16 x 1.1/4 x 0.062
 		 6,10
 		 "
425 x 32 x 1.60 17 x 1.1/4 x 0.062 6,10 "
450 x 32 x 1.60 18 x 1.1/4 x 0.062 6,10 "
450 x 40 x 1.60 18 x 1.1/2 x 0.062 6,10 "
450 x 40 x 2.00 18 x 1.1/2 x 0.075 4,6,10 10
450 x 45 x 2.25 18 x 1.3/4 x 0.088 4,6,10 "
500 x 32 x 2.00 20 x 1.1/4 x 0.075 4,6 "
500 x 40 x 2.00 20 x 1.1/2 x 0.075 4,6,10 "
525 x 40 x 2.00 21 x 1.1/2 x 0.075 4,6,10 "
525 x 45 x 2.25 21 x 1.3/4 x 0.088 4,6 "
550 x 40 x 2.00 22 x 1.1/2 x 0.075 4,6,10 "
600 x 40 x 2.00 24 x 1.1/2 x 0.075 4,6,10 "
600 x 45 x 2.25 24 x 1.3/4 x 0.088 4,6,10 5
600 x 45 x 2.25 24 x 1.3/4 x 0.088 4,6 "
600 x 50 x 2.00 24 x 2 x 0.075 4,6,10 "
600 x 40 x 2.50 24 x 1.1/2 x 0.100 4,6 "
600 x 50 x 2.50 24 x 2 x 0.100 4,6 "
700 x 40 x 2.50 28 x 1.1/2 x 0.100 4,6 "
700 x 50 x 2.50 28 x 2 x 0.100 4,6 "
750 x 40 x 2.50 30 x 1.1/2 x 0.100 4,6 "
750 x 50 x 2.50 30 x 2 x 0.100 4,6 "
800 x 50 x 2.50 32 x 2 x 0.100 4,6 "
900 x 50 x 2.50 36 x 2 x 0.100 4,6 "
BIMETAL HIGH SPEED STEEL
Combining two materials, tooth line with high alloy high speed steel and body of tough tool steel the blade results in maximum wearing strength and cutting capability, making it far superior to ordinary high-speed steel blades. Blades suitable for Kasto Machines can also be produced.
 
SIZE IN M.M.
(L x W x T)		 SIZE IN INCHES
(L x W x T)		 TEETH
PER INCH		 UNIT OF PACK
300 x 25 x 1.25 12 x 1 x 0.050 10,14 20
300 x 32 x 1.60 12 x 1.1/4 x 0.062 6,10 "
350 x 25 x 1.25 14 x 1 x 0.050 6,10,14 "
350 x 32 x 1.60 14 x 1.1/4 x 0.062 4,6,10 "
350 x 32 x 2.00 14 x 1.1/4 x 0.075 4,6,10 "
350 x 38 x 2.00 14 x 1.1/2 x 0.075 4,6,10 "
400 x 32 x 1,60 16 x 1.1/4 x 0.062 4,6,10,14 "
400 x 32 x 2.00 16 x 1.1/4 x 0.075 4,6,10 "
400 x 38 x 2.00 16 x 1.1/2 x 0.075 4,6,10 "
425 x 32 x 1.60 17 x 1.1/4 x 0.062 10 "
450 x 32 x 1.60 18 x 1.1/4 x 0.062 4,6,10,14 "
450 x 32 x 2.00 18 x 1.1/4 x 0.075 4,6,10 10
450 x 38 x 2.00 18 x 1.1/2 x 0.075 4,6,10 "
450 x 45 x 2.25 18 x 1.3/4 x 0.088 4,6 "
475 x 45 x 2.25 19 x 1.3/4 x 0.088 6 "
500 x 38 x 2.00 20 x 1.1/2 x 0.075 4,6,10 "
500 x 45 x 2.25 20 x 1.3/4 x 0.088 4,6 "
500 x 50 x 2.50 20 x 2 x 0.100 4,6 "
525 x 38 x 2.25 21 x 1.1/2 x 0.075 6 "
525 x 45 x 2.25 21 x 1.3/4 x 0.088 4,6 "
525 x 50 x 2.50 21 x 2 x 0.100 4,6 "
550 x 45 x 2.25 22 x 1.3/4 x 0.088 6 "
550 x 50 x 2.50 22 x 2 x 0.100 4,6 "
575 x 45 x 2.25 23 x 1.3/4 x 0.088 4 "
575 x 50 x 2.50 23 x 2 x 0.100 4 "
600 x 45 x 2.25 24 x 1.3/4 x 0.088 6 5
600 x 50 x 2.50 24 x 2 x 0.100 4,6 "
650 x 50 x 2.50 26 x 2 x 0.100 4,6 "
700 x 50 x 2.50 28 x 2 x 0.100 4,6 "